SECTION 2
Safe Dispensing of Propane
SAMPLE MSDS - SAFETY MATERIAL DATA SHEET

MATERIAL SAFETY DATA SHEET*

Section 1.
Suppliers Name
______________________________________ Emergency Phone No. _______    ____
Address ____________________________________________________________________________________________________________
.  

Chemical Name

___ Liquefied Petroleum Gas or Propane_______

CAS Registry No. __74-98-6______

Chemical Family ____Hydrocarbon_____________________________ Formula
HAZARDOUS INGREDIENTS
Section 2.
Hazardous Mixtures Air with 2.15 to 9.60 percent propane
 
PHYSICAL DATA
Section 3.
Boiling Point -44° F Specific Gravity (H 2 0= 1) 0.51 Vapor Pressure (mm HG) at 100°F 9825 Percent, Volatile by Volume (%) 100 Vapor Density (Air= 1) 1.52 Evaporative Rate None Solubility in Water Slightly Appearance and Odor Clear - unpleasant odor caused by odorant
 
FIRE AND EXPLOSION HAZARD DATA
Section 4.

Flash Point N/A Classification Flammable Gas UN 1075 LEL 2.15 UEL 9.60 Flammable Limits___________________ Extinguishing Media Water Spray: Class A-B-C or BC Fire Extinguishers Special Fire Fighting Procedures Stop flow of gas. Use water to keep fire-exposed containers cool. Use water spray to disperse unignited gas or vapor. If ignition has occurred and no water available, tank metal may weaken from overheating. Evacuate area. If gas has not ignited, LP-gas liquid or vapor may be dispersed by water spray or flooding.

 
HEALTH HAZARD
Section 5.
Threshold Limit Value 1,000 PPM Permissible Exposure Limit 1,000 PPM Effects of Overexposure Inhalation -- concentration can lead to symptoms ranging from dizziness to anesthesia and respiratory arrest. Eyes -- moderate irritation. Emergency and First Aid Procedures Inhalation -­ remove to fresh air. Guard against self-injury. Apply artificial respiration if breathing has stopped.
 
REACTIVITY DATA
Section 6.
< tr>
Stable X Unstable _ Hazardous Decomposition Products __ None ______________________________
Incompatibility (materials to avoid) Mixing with oxygen or air, except at burner __________________
Hazardous Polymerization: May Occur _______________________ Will Not Occur ________________________
 
SPILL OR LEAK PROCEDURES
Section 7.
Steps to be taken in case material is released: Keep public away. Shut off supply of gas. Eliminate sources of ignition. Ventilate the area. Disperse with water spray. Contact between skin and these gases in liquid form can cause freezing of tissue causing injury similar to thermal burn. Waste Disposal Method Controlled burning. Contact supplier.
 
SPECIAL PROTECTION INFORMATION
Section 8.
Respiratory Protection
Stay out of gas or vapor (because of fire hazard)
Ventilation Explosion-proof motors and keep sources of ignition at safe distances.
Personal Protective Equipment and Apparel Heavy duty gloves, goggles for protection against accidental release of pressurized products.
 
SPECIAL PRECAUTIONS
Section 9.
Precautions to be taken when handling and storing Keep containers away from heat sources and store in upright position. Containers should not be dropped. Keep container valve closed when not in use.
Other precautions Install protective caps when not connected for use.
 
TOXICOLOGICAL INFORMATION
Section 10.
OSHA Carcinogen Classification (29 CFR 1910) Not listed/applicable X
 
DOT LABELING INFORMATION (49 CFR 100-199)
Section 11.
Proper Shipping Name _____ Liquefied Petroleum Gas Hazardous Classification Flammable Gas Identification No. UN 1075 Label(s) Required ________ Flammable, Class 2

 

This MSDS Sheet is only a demo!
This is a sample Material Safety Data Sheet that should be provided by your propane supplier in compliance with the federal Community Right-To-­Know Act, and is not meant to act as a substitute for this form or to be used in compliance with this Act. This is not to be used for purposes other than this training class.
If you need the definition of a word click here!